The spring term of woodwork evening classes started this week.. with some new students.. and new projects for many others. Since this event is uppermost in our minds right now, it seemed appropriate to write a few words about it. You may already know, but we hold these weekly classes here in our workshop at Uckfield Framing Company, and have since migrating from a local school many years ago.
Catching up with our woodworkers after the Christmas break inevitably becomes a bit of a show and tell exercise, with particular emphasis on woodwork projects, many completed in the run up to Christmas. I always like to keep pictures of these projects, and looking back on these made me realize what a variety of beautiful work has been made over the years by these highly talented people.

This pair of miniature chairs was completed for very young twin grandchildren, with beautiful hand painted lettering too!
Each student brings their own particular angle to the classes, so after a short introduction to the tools and machines, will choose what to make. Restrictions are really only based on what we can physically fit into the workshop, and move to and from home each week. All we do is to try to provide the environment to bring their designs to reality.
A bit of advice, instruction and help where needed is all people need to satisfactorily realize their own results themselves. These results, although varied in subject, are all by definition bespoke, and additionally very personal in being hand made. So not only are the students improving their woodworking skills along the way, they are also proudly making family heirlooms!

Wooden toys made for children is a familiar subject
This is just a small taste of some of the many hundreds of projects made over the thirty plus years of running these evening classes. So apologies to all my students for either embarrassing them by showing their work here (thanks Bob, John, Martin and Trish), or for not showing it at all! If you are interested in joining our classes, please call or email us. We will soon be running a picture framing class too..

Furniture for the garden is always popular

Hi
I’m interested in the woodworking classes. Am I too late as I see they have already started this year?
Regards
Donna
Hi Donna, sorry for slow response here, but we’re in touch on email now about next term
Woodworking project qetuison .?I’m making a bunch of wood frames to hang decorative fabric on my walls. The framing wood is1 inch thick and the frames will be mostly around 4 foot square (some smaller, a few larger). They wil be relatively heavy once the fabric is on the frames a few pounds each.I originally bought a heavy duty staple gun to connect the joints at the corners of the frames (butt, not mitre). This will not work the staples do not go in flush to the wood, and there is too much wobble at the joint. I can use the staples to attach the fabric to the frames, but not for the joints themselves.I’d like to avoid using brackets it will add expense, as I have 44 joints to connect. Any suggestions as to how to connect the joints? Wood glue? It would be an edge grain against an end grain. I can’t clamp after I glue don’t have benches or clamps (or any other equipment other than the basics). The joints will be bearing several pounds as they hang.Thoughts or Ideas?Thanks Maybe glue and nails? Hate to think of trying to hammer in all of those nails without a clamp or bench to hold those long, skinny pieces of wood in place. .Hmm. Yes I do have a drill. I’ll think about the drill idea. It’d be harder than it sounds, because I’m using (in many cases) a piece of wood that is one inch square and four feet long. Think of two of those butted against one another to form a right angle, and then trying to get a drill through both. Yarg. I might just glue, and then the fabric wrapped and stapled around the frames will add structural strength (maybe).Thank you to everyone for your feedback. I had a eureka’ moment based on the second person who answered. I think I will use the drywall (or wood) screws and drill pilot holes, but the idea is that I will do that after gluing and letting the glue dry. This way the peices will be together and I won’t have to wrestle with trying to hold two skinny peices of wood at right angles while drilling pilot holes and putting the screws in. Thanks to all and to the answerer who gave me the help that led to my solution.
You’ll just have to come to my woodwork class!
Hello, I would like to join your class, is it too,late to join for this term? Tamara
Hope to see you again, Tamara
Can you send me details of your new woodworking classes please, is there one starting August / September ? Thanks
Hi Nicky, sorry didn’t see this before! The next term begins in January. Please phone for details..
Hi Nicky, still interested in starting in September? Then please email us on sales@uckfieldframing.co.uk. Thanks Tim
Hello,
I think I may be too late to join your most recent term, but am interested as to when the next will be, what the fees are and what day the classes are held.
Many thanks,
Hannah
Hi Hannah, if you are interested please email us on sales@uckfieldframing.co.uk Thanks, Tim
Hello very interesting my son 11 would love to join ? Can he ?
Kind regards,
Nathalie
Hi nathalie, sorry for delay I’ve been away. If he is really keen let me know and I can discuss with my insurer. Please phone to discuss. Thanks Tim