How we fix pictures to walls is a subject we rarely think about. We tend to spend ages choosing colours and finishes for mounts and frames, or weighing up various glazing options. And then the picture is simply hung on any old nail that happens to be roughly the right height! Ok, maybe I exaggerate, but often this is not far from the truth. So, nothing wrong with that, as long as the hook is strong enough to hold the picture. If not, the frame comes crashing to the floor, denting the skirting board and breaking the glass, often in the dead of the night.

That familiar sound of breaking glass!
As we all know, two wall hooks are often better than one, as it is safer and makes it easier to keep the picture level. But even then picture does not sit tight to the wall, and can easily be knocked. One alternative solution is to fit the picture to the wall with so called ‘security’ fixings. These kits are designed to fix wooden or metal framed pictures firmly to walls, and in doing so make them difficult to steal. But they are also a handy way of fitting them parallel to the wall, such that they stay level. So very useful in high traffic areas such as staircases where they might get knocked by passersby.
This week we have been making a large frame for a customer who particularly requested we also install it in their home with a secure wall mounting. The particular kit we used comprises three brackets, which are fitted to the back of the frame like so:

One of three brackets screwed to the back of the frame
The rest of the kit is the wall fittings… T-shaped screws which must be secured to the wall with appropriate plugs. The trickiest bit of the installation is to ensure these screws align exactly with the brackets on the back of the frame! Here you can see a level line is drawn onto the wall, and the positions of the two bottom frame fixings transferred by accurate measurement:

Marking out the wall for the plugs and wall screws
The picture is then offered up to the wall over the two bottom screws, and the exact position of the top wall mount can be marked onto the wall. Once the final wall plug is fitted with its screw the picture can be lifted onto all three screw heads (hopefully). That done, the head of each T-screw is turned through 90 degrees with a small spanner, effectively locking the picture in place.
And here is the finished job fitted yesterday in an Uckfield kitchen:

Finished map in solid oak frame fixed securely to the wall

Personally, I like to hang framed items flush against the wall – especially where space is tight. But vertical, whether flush or not, certainly seems preferable to dangling at an angle, most of the time.
Yes, I quite agree. It also looks much better