When our customers collect their framed artwork from us, they sometimes ask us the best way to hang the finished product. We are always happy to advise on good quality wall fixings and how to use them. However, banging a picture hook into a wall doesn’t take much brain- or muscle-power, and it isn’t always the best way to put up a picture.
The best method for hanging depends, obviously, on what sort of picture (and weight) it is, and what sort of wall it will be gracing. Quite often, the walls are more of a problem than the frames, because they don’t ‘take’ picture hooks readily, and you have to faff about with an electric drill in order to do a simple hanging job.

Our client’s finished trophy wall
Good quality picture hooks are a given, if you have normal walls. Most households have a stash of different ones lurking in a drawer or toolkit – doubles for heavier pictures, steel pins for difficult walls; plastic tri-pins etc. These suit most hanging efforts.
If you have difficult walls, however, or just don’t like the idea of the damage than a conventional hook causes to your wall finish, there is a solution: Command Strips by 3M (available in DIY and hardware stores, and even WH Smith). Like the ubiquitous 3M Post-it pad, they use a specific stickiness (in this case, a seriously powerful adhesive quality) with a velcro-like adjustability.
They come in different sizes/strengths, and the larger ones can take a weight of up to 7.2kg, which is pretty impressive. Most pictures won’t weigh anywhere near that, even the big ones.
Fixing is pretty simple (and there’s a ‘How To Do IT’ video as well as the 3M instructions on the manufacturer’s site). You pull off the chosen size fixing strip from its pack, press the two sides together and peel off the backing. Attach four of these pairs to the back of the frame, peel of the backings and apply to the wall. Then you gently unhitch the picture and press home the wall-fixed part for 30 seconds. Wait an hour, stick your picture back on and it’s now firmly in situ. Simples!

Command strips attached to the frame back
We successfully installed six assorted sized pictures for one of our corporate clients to a particularly troublesome wall earlier this month using this 3M Command Strip system. No cracked plaster, no infernal SDS masonry drill racket, no dust or drama. Frames fixed nice and firmly, close and parallel to the wall surface, not dangling at a jaunty angle. And best of all, when the company are presented another Queen’s Award to Industry, Blue Peter badge or whatever, the wall can be rejigged without first being redecorated.
Yes, the real genius of these clever little strips is that they are removable. By some mysterious alchemy, when you want to move your picture somewhere else, you take down the frame, pull on the tabs on the wall and the adhesive unravels itself, leaving the surface behind undamaged. Jolly clever.
Tilly

Gosh what a wonderful tip. Have been in my new house for over 3 months now and my husband cannot bring himself to damage our beautiful newly plastered walls. Hence bare walls to date and acres of space taken up with neatly stacked pictures waiting for their moment! My usual bang it in and hope for the best approach has remained in check. We ve only been married six months and I don’t want to upset him! Off to get some 3m tape first thing tomorrow. Thank you so much.
Glad you found it useful Lynn! You’ll need one pack for each frame, and they’re not cheap. But worth it we think. Tim