We were delighted to hand over the illuminated display case we’ve been making, and thanked our happy customer for bringing us such a great project! The challenge was to display a set of twelve fragile glass slides that made up a Victorian ‘Magic Lantern’ show, each of which is approx 75mm square and exquisitely hand painted. Bought by our customer some time ago, they really needed to be mounted and ideally back lit to be properly appreciated.. like those medals we framed a while back, languishing in a drawer is not the best option.

The completed slide show
Magic Lantern shows entertained audiences back in the days before movies, the slides being projected onto a screen lit by anything from gas mantles to electric bulbs. Ours is bang up to date with the latest LED technology to tick all boxes for longevity and low power consumption, and giving a good even spread of light to see the slides in all their glory.

LED sections ready to be put into the aluminium channel
To add a little detail to those out there wanting to make something similar, including the picture framing community worldwide, we’ll show exactly how we made this compact magic lantern display. (We made a less compact one a while back, for 10 slides in one row). Firstly two identical multi-aperture mounts had foam spacers added to keep the glass slides in place, in turn sandwiched between sheets of glass (outside appropriately using TrueVue UltraVue ‘magic’ glass), all held in a deep box frame, with spacers creating a white finished light box.

Inside the light box
Four sections of LED flexible strip were soldered together from a socket, each contained within small aluminium channels. Although this adds cost and time, the advantage is the aluminium dissipates heat giving better LED life, can be screwed in place, and the snap on opaque diffuser masks the point light sources to some degree.

Simple plug in power supply..
For the record we used Collingwood LSV44 LED strip, bright at 15 watts per metre in a white 4000k colour temperature, which conveniently can be cut at 100mm intervals. Our friends at CEF helped us source all these LED bits and bobs, with Farnell providing the 24v 12W plug in power supply, complete with cable and jack.

..means neat wiring, and no internal transformer
If you’re still here after all that anorak stuff, and might know something of the history of these slides, or of the military story they illustrate, then please make contact as our customer would be very interested indeed. And if you’d like a light box made for your slides or stained glass panel, then you know where to come!
Tim
