When we make a frame for you, one of the most important tasks we have is to ensure that the finished product is as error-free as possible. Because we are working with natural materials, sometimes that can be more difficult than you’d expect.
Paper products can have embedded flaws; new glass can arrive with tiny scratches or other imperfections; lengths of wood can have everything from an uneven grain, through knots, to splintery faults called ‘shakes’ which can mean we reject a particular length in favour of another. And those are just the materials we use.
The process too has its perils: a flawless, clean cut by the guillotine or mount cutter is to be striven for – but not always easy to achieve. Sometimes blades blunt because of misuse, other times that infamous ‘ding’ occurs (usually when the wrong cutting edge is used on either glass or card). A thumbprint can transfer itself as if by magic to the surface of anything we are using to enhance your art. Assembled frames can sometimes deposit random sawdust particles onto a pristine surface when we are collating the elements for taping.
Sometimes it’s a judgement call: one man’s naturally uneven and knotty wood grain is something to be desired, whereas for another it’s an imperfection to be avoided.

In this case ‘imperfections’ add character to these reclaimed wood frames…
Recently a whole consignment of mount board had to be sent back because – somewhere in the manufacturing process, probably – myriad specks of ‘crud’ dotted the boards. Typically, the spread of these unwelcome speckles was such that we couldn’t squeeze a single mount out of any board. It is rare, but it happens. Fortunately, the replacement boards were mercifully crud-free, but we do have to inspect all incoming items carefully to ensure they are up to the necessary quality we demand.

Pinpointing ‘crud’ in the mountboard…
Attention to detail is critical – a particularly good example is one of our beautiful poppy cases, where the whole looks pretty spectacular but it was noted that a tiny little strip of mount board had come adrift at the back of the piece and needed securing properly. Maybe most people wouldn’t have noticed it, but we did, and took the necessary remedial action.

With these pine frames we endeavour to match up the streaky grain of the wood…
The team is fortunate in having a combination of skills to ensure a good finish to our assignments – young hawkeyes scrutinize for specks of unwanted inclusions and flaws in products, other members are deft with paintbrush and sandpaper. Everybody brings something to the effort, so that when you collect your finished piece of work, you can rest assured that it has passed several quality control tests before we hand it over. It is a given with the work we do that we keep a close eye on each stage of the process.
So we are vigilant. And careful. And picky… so you don’t have to be. We don’t claim 100% perfection, but we do our level best to aim for it, because it gives us pleasure to hand over finished items of which we are as proud as you.
Tilly
