One of my regular tasks in the workshop is to prepare ‘ingredients’. Usually back, glass and mount board cut to size and ready for a frame that is still in a clamp, settling into the right degree of rigidity for use, or for a special moulding that is due for delivery. It is an efficient way to have everything ready for assembly once the last element of a job is in situ.

It got me thinking about why we use the ingredients we do use: updating old framing brought in for refurbishment has taught me that the materials we have on hand at the workshop are durable and do the job far better than some of the older types of framing materials. So I asked Tim about it. His response was to explain that use of inferior quality ingredients is always a poor economy – if you skimp on any element in framing, the end result will show it sooner or later. You may well be able to frame your beloved image cheaply, but chances are you will be re-framing it far sooner than you had hoped.

So here’s the low-down on the ‘ingredients’ we put into a frame:

Feeling a little board...

Feeling a little board…

The Back:

We use a conservation grade, moisture resistant pH-neutral heavy-duty board with a white front and brown back. It is delivered to us in large sheets slightly bowed in the middle, so that when it is secured into the frame, it pushes the artwork and mount boards flat against the moulding and keeps that pressure up while the whole settles into its new shape. We use this superior quality board with the white-coated front because there can be ‘show through’ on plain boards (which is where a brown back actually dims the appearance of your piece of artwork – it makes sense that a white back avoids this);

The Mount Boards:

Nearly all the mount boards we use are conservation grade, which again will protect the artwork, being acid-free (same thing as pH-neutral) and which won’t go that grotty brown colour you can see on old mount boards where the bevel cut has deteriorated over time. We also use extra thick mount boards on occasion (bit of a mission to cut these accurately, as I discovered recently) which give a strong, clean line around the image and look luxurious. The mount boards are as important as the moulding (frame bit) to the success – or otherwise – of a framed picture. They can ‘throw’ the artwork out of the frame or they can ‘swallow’ it. Colour and texture are a fantastic playground for anyone wanting to jazz up their existing pictures (and it is huge fun – I have been doing it), and highly recommend it as a means of beautifying a tired picture, and giving terrific satisfaction at rescuing something that you liked, but which was looking tired and needed TLC.

Getting it taped...

Getting it taped…

The Tapes:

Our go-to fixing tape for attaching artwork is a pH 7-70 tape. It does what it says on the packet, being acid-free, and it has the right degree of stickiness to hold the artwork in place without using masses of it – we often see old pictures for refurbishment which have had the image taped all round with masking tape – with consequent buckling and distortion. We use a couple of tabs of pH 7-70 and your image then ‘hangs’ within the frame and can contract and expand as per conditions, without distorting. The backing tapes are Tesa Brown tape (various thicknesses available) and they seal in the components and keep them safe from the Evil Thrips, as well as holding the back securely and neatly. Taping is a pleasing art – there is a Zen Zone to taping a picture, and one that I particularly enjoy when life is less than placid.

To be continued…